Hail Damage Gutter Replacement in Omaha, NE

The front face of a K-style gutter takes most of the hits. Small hail leaves shallow round dents that are mostly cosmetic. Larger stones flatten the ogee curve, crease the bottom edge and can pull the gutter off its hangers when they hit the back of the trough at an angle.

Downspouts usually show damage before gutters do, because their thin flat faces dent easily and sit at a height where hail strikes them square. Elbows can crack at the crimp. Inside the trough, dents along the bottom create low spots that hold water and grit after the storm passes.

• Round dents on the gutter face and downspout fronts
• Flattened or creased profile along the bottom edge
• Chipped or crazed paint at the impact points
• Split miters and end caps knocked loose
• Crushed elbows and bent downspout straps

Dent diameter roughly tracks hailstone size, which is why we measure dents rather than just photographing them. We lay a tape or scale across representative dents on each elevation, note the spacing and direction of the hits, and photograph the same spots wide and close so the location is clear.

Hail rarely hits every side of a house the same. Wind drives it from one direction, so the windward gutters and downspouts take more damage. Recording each side separately gives a clearer picture than a few close-ups from the worst corner.

We provide the photos, measurements, run lengths and a description of the gutter system: profile, size, gauge where we can measure it, and downspout count. That is the information an adjuster typically asks for when assessing gutters, and having it organized can save you a second trip up a ladder.

We do not file claims, negotiate with adjusters, or tell you what your policy covers. Coverage, deductibles and depreciation are between you and your carrier. Our guide to documenting hail damage explains what to gather yourself before you call your insurer.

Not every dented gutter needs replacing. A run with shallow cosmetic pocks, sound seams and good slope still drains correctly. Cracked seams, a flattened profile, failed hangers or crushed downspouts are functional damage, and patching dented aluminum does not restore its shape.

When we replace, the old runs come down, the fascia gets checked, and new seamless gutters are formed on site to length. Many homeowners use the replacement to move up to heavier .032 coil, or to steel gutters where dent resistance matters most. If the roof is also being replaced, coordinating with a detach and reset plan avoids hanging new gutters twice.

Large hail events fill calendars fast across the metro. Call us soon after the storm so we can document the damage while it is fresh and before any temporary fixes change what an adjuster sees. Replacement then follows your claim decision and our crew schedule.

If a hailstorm also brought wind that tore a gutter loose or left a section hanging, that becomes a safety repair first. Our storm damage repair work covers making the house safe before documentation and replacement.